In the quest for an aesthetic and welcoming home, the installation of hinged shutters presents itself as both a practical and decorative solution. These architectural elements, in addition to providing effective protection against the weather and intrusions, enhance the charm of every facade. Their installation requires precision and know-how to ensure a flawless and functional result. In line with the style of your home, hinged shutters can become true accents of color and design, thus bringing a unique touch to your environment.
IN SHORT
|
Installing hinged shutters is an essential step for the beautification of any house. Not only do they add a touch of elegance and style, but they also serve to protect your home. This process requires particular attention at every stage, from measuring to final fixing. Discover how to carry out this installation effectively and aesthetically.
Importance of Accurate Measurements
Before starting the installation, it is crucial to take accurate measurements. To do this, measure the dimensions of the window frame. This will determine the correct dimensions of the hinged shutters. At this stage, it is advised to deduct 1 cm in height and width to allow for a peripheral play of 5 mm, which is essential for the proper functioning of the shutters. If you choose to install a two-leaf model, the deduction increases to 1.5 cm in width.
Preparation of the Shutters
To ensure this play, it is recommended to screw 5 mm battens onto each edge of the shutters. For two-leaf models, one batten will suffice to separate the two parts. Next, it is advisable to temporarily fix two battens on each side of the shutter to ensure good stability during the initial installation.
Alignment and Marking
When placing the shutters temporarily, it is essential to check the alignment of the leaves, especially for two-leaf shutters. This ensures perfect symmetry once the installation is completed. At this stage, mark the location of the hinges on the wall for the upcoming fixing.
Installation of the Hinges
Once the marking is done, make pilot holes at the location of the hinges. For this, use a hammer and chisel to prepare the proper supports. The shutter can then be fixed by screwing the temporary battens into the wall. Remember to fill the holes of the hinges with a mixture of cement and small pebbles for better strength. After that, insert the hinges and allow enough time for the sealing to dry.
Finishes and Checks
After removing the shutter, wash up around the hinges. Then, replace the shutter and check that it does not rub against the window frame. When the shutter is open, it is necessary to determine the location of the stops that will hold it in the open position, and then seal them. Finally, when the shutter is closed, proceed similarly by installing the hooks that hold the shutter in the closed position.
Moistening Before Sealing
Before proceeding to a final sealing, it is important to moisten the inside of the hole to maintain the moisture of the cement throughout the operation. This ensures better adhesion and prolongs the lifespan of the installations.
For more tips on installing shutters, you can explore this interesting article on the installation of roller shutters.
Comparison of Essential Elements for Installing Hinged Shutters
| Elements | Concise Details |
|---|---|
| Measurements | Take the dimensions of the window frame, deduct 1 cm for peripheral play. |
| Battens | Screw 5 mm battens onto each edge, use one for two leaves. |
| Alignment | Check the alignment of the leaves during the temporary installation. |
| Pilot Holes | Make pilot holes for the hinges then finish them with hammer and chisel. |
| Sealing | Moisten the holes before sealing to ensure cement adhesion. |
| Stops and Hooks | Determine and seal the stops for open position and the hooks for closed position. |
| Final Check | Ensure that the shutter does not rub against the window frame. |
